PELCO Precision low speed saw accessories

The PELCO Precision Low Speed Saw is a compact, multipurpose, precision saw designed to cut a wide variety of materials with minimal subsurface damage. Its low speed makes it possible to cut fragile materials that would otherwise fracture as well as soft materials that would load the diamond wheel on a higher speed saw. A variety of sample holders and accessories are available, providing a means for mounting any shape of sample, while multi-axis goniometer adaptability simplifies cutting oriented crystals.Accessories available:CodeTypeDescription

The PELCO Precision Low Speed Saw is a compact, multipurpose, precision saw designed to cut a wide variety of materials with minimal subsurface damage. Its low speed makes it possible to cut fragile materials that would otherwise fracture as well as soft materials that would load the diamond wheel on a higher speed saw. A variety of sample holders and accessories are available, providing a means for mounting any shape of sample, while multi-axis goniometer adaptability simplifies cutting oriented crystals.

Accessories available:

Code	Type	Description
ETP75000-B	Bio-Specimen Set	Set includes all accessories included with the base saw with the addition of a PEL812-333 diamond wafering blade, ETP75019 Freeform Sample Holder, ETP75010 Splash Guard, additional sample mounts, and consumables.
ETP75001	Single-Axis Goniometer	Graduated scale with a 0.2? vernier and can be rotated 360?. This rotational capability makes it ideal for precisely slicing single crystals as well as biological specimens. The sample is mounted to a block using a low melting point wax and the block is subsequently clamped into the saw.
ETP75005	2-Axis Goniometer	Used for orienting and cutting single crystals. With the sample mounted to the goniometer, the vertical axis can be rotated +/- 50? from the 0.2? vernier on the arm.
ETP75003	Double Clamp Sample Holder	Designed to clamp both ends of a round or rectangular rod while cutting between the two clamped positions.The Double Clamp Sample Holder can also be used as a single clamp holder to hold encapsulated metallurgical samples up to 31.8mm diameter.
ETP75004	Petrographic Vacuum Sample Holder	designed to use a vacuum to hold a 2.5 x 5.0cm petrographic or other mounted glass slide, while making saw cuts parallel to the glass slide. The glass slide is held against a stainless steel support plate with vacuum and is placed firmly against three locating pins to maintain its position.
ETP75006	Vice Sample Holder	Designed to hold flat, round and irregularly shaped samples without the need for mounting wax. The entire vice can rotate 360? in the horizontal plane. An extended v-notch jaw enables the mounting of cylindrical samples up to 31.8mm diameter including encapsulated metallurgical samples.
ETP75019	Freeform Sample Holder, 360 Degree, "Bone Chuck"	Allows you to hold the sample utilising a series of ten independently adjustable mounting screws. These mounting screws make it possible to hold irregularly shaped specimens and rotate them 360? in a horizontal plane.  Attaches to the standard work arm in place of the standard sample holders.
ETP75053	Aluminium sample mount	Size: 25.4mm x 76.2mm x 6.35mm. For use with Single-axis Goniometer
ETP75054	Graphite sample mount	Size: 22mm x 63.5mm x 3.2mm. For use with Single-axis Goniometer
ETP75032	Cutting Load Weight, 100g
ETP75033	Cutting Load Weight, 200g
ETP75036	Blade Supports, 34.8mm dia.	Available in pairs. Recommended that the largest blade support (e.g. minimum blade exposure) possible be used for a given sample diameter to increase precision and help prevent damage to the blade.
ETP75035	Blade Supports, 47.5mm dia.
ETP75034	Blade Supports, 61.7mm dia.	Available in pairs. Supplied with the saw. Recommended that the largest blade support (e.g. minimum blade exposure) possible be used for a given sample diameter to increase precision and help prevent damage to the blade.
ETP75039	Blade Spacer, 3.2mm	Allows mounting of multiple blades or increasing the range of blade offset.
ETP75038	Blade Spacer, 19mm	Supplied with the saw. Allows mounting of multiple blades or increasing the range of blade offset.
ETP75037	Blade Spacer, 25.4mm	Allows mounting of multiple blades or increasing the range of blade offset.
ETP75041	Inch Micrometer Assembly	An inch micrometer assembly is available as the blade position is controlled with a metric micrometer.
ETP75010	Splash Guard
ETP1066-3	Silicone Rubber Lab Mat	Blue/White