SEM multi metallographic specimen mounts, cylinder mount

SEM multi metallographic specimen mounts are on an M4 cylinder base, made with machined alumin...

SEM multi metallographic specimen mounts, pin mount

SEM multi metallographic specimen mounts are on a pin stub base (3.1mm diameter x 9.5mm length...

SEM bulk specimen vice, springloaded, M4 cylinder

Springloaded vice clamp with reversible jaws for an opening up to 38mm with M4 threaded base. ...

PELCO SEM bar clamp specimen vices, pin mount

The PELCO Bar clamp vices have a 3.2mm pin stub, 9.5mm length and are available in three lengt...

PELCO SEM 70 deg. vice specimen mount, pin mount and M4 cylinder

The PELCO SEM 70°vice specimen mount is ideal for EBSD and has a removable 3.2mm diameter pin ...

SEM vice bulk specimen mount, springloaded, pin mount

Springloaded vice clamp with reversible jaws for an opening up to 38mm with a 3.2mm diameter p...

SEM vice specimen mount, springloaded, M4 cylinder

The SEM spring-loaded vice specimen mount can clamp samples up to 12.7mm with jaws 25mm in len...

PELCO SEMClamp block specimen mount, recessed, M4 cylinder

The PELCO SEMClamp block specimen mount has is recessed to allows for background free imaging ...

PELCO SEMClamp block specimen mounts, M4 cylinder

The PELCO SEMClamp block specimen mounts has a wide clamping area with M4 threaded base. A con...

PELCO SEMClamp specimen mount, M4 cylinder

The PELCO SEMClamp specimen mount is a 15mm diameter x 10mm high cylinder mount with a M4 thre...

SEM needle clamp specimen mount, M4 cylinder

The SEM needle clamp specimen mount is ideal for use with small tubes, needles or wire with a ...

SEM vice specimen mount, pin mount

The SEM vice specimen mount can hold a variety of specimens up to 11mm in width. The length of...

SEM vice specimen mounts, springloaded, pin mount

The SEM spring-loaded vice specimen mounts can clamp samples up to 12.7mm or 26mm with jaws 25...

PELCO SEMClamp block specimen mount, recessed, pin mount

The PELCO SEMClamp block specimen mount has is recessed to allows for background free imaging ...

PELCO SEMClamp block specimen mounts, pin mount

The PELCO SEMClamp block specimen mounts has a wide clamping area with a 3.2mm diameter pin st...

PELCO SEMClamp specimen mount, pin mount

The PELCO SEMClamp specimen mount is a 12.7mm diameter mount with a 3.2mm diameter pin stub id...

SEM 70 deg. specimen embedding mounts, pin mount

The SEM 70°pre-tilt holder specimen embedding mounts avoids drift and enables quick setup for ...

SEM low profile metallographic specimen mounts, pin mount

The SEM low profile metallographic specimen mounts with 3.2mm diameter pin stub come in variou...

SEM bulk specimen holders, large, straight, pin mount

The SEM bulk specimen holders are versatile specimen holders to clamp irregular or long shaped...

SEM bulk specimen holders, straight, pin mount

The SEM bulk specimen holders are versatile specimen holders to clamp irregular or long shaped...

SEM needle clamp specimen mount, pin mount

The SEM needle clamp specimen mount is ideal for use with small tubes, needles or wire with a ...

SEM vice specimen mounts, pin mount

The SEM vice specimen mounts are 25mm diameter mounts with a 3.2mm diameter pin stub. Made fro...

SEM slotted specimen mount for AMRAY, pin mount

The SEM slotted specimen mount for AMRAY is ideal for thin samples from textiles, plants, pape...

SEM 36 deg. specimen pin mount holder, pin mount

The SEM 36°specimen pin mount holder can hold 12.7mm diameter mounts with 3.2mm diameter pin. ...

SEM 45/90 deg. specimen mount and cross section holder, pin mount

The SEM 45/90°specimen mount and cross section holder has a 3.2 diameter pin stub base and is ...

SEM metallographic specimen mounts, M4 cylinder

The SEM metallographic specimen mounts allow for mounting of metallographic specimens of vario...

SEM low profile metallographic specimen mounts, M4 cylinder

The SEM low profile metallographic specimen mounts with M4 cylinder base come in various diame...

SEM 45/90 deg. specimen mount and cross section holder, M4 cylinder

The SEM 45/90°specimen mount and cross section holder has a M4 base and is a combined specimen...

SEM bulk specimen holder, 3 screw, M4 cylinder

The SEM bulk specimen holder uses 3 screw to hold specimens up to 25.4mm in diameter. The slot...

SEM bulk specimen holders, straight, M4 cylinder

The SEM bulk specimen holders are versatile specimen holders to clamp irregular or long shaped...

SEM bulk specimen holder, 4 screw, M4 cylinder

The SEM bulk specimen holder use 4 screws to hold irregular and round specimens up to a diamet...

SEM vice specimen mount, M4 cylinder

The SEM vice specimen mount can hold a variety of specimens up to 11mm in width. The length of...

SEM vice specimen mount, large double slotted, M4 cylinder

These SEM double slotted large vice specimen mounts allow for set screw vice clamping of thin ...

SEM vice specimen mount, large slotted, JEOL cylinder

The SEM slotted large vice specimen mounts allow for set screw vice clamping of thin sections ...

SEM bulk specimen holders, 4 screw, pin mount

The SEM bulk specimen holder can accommodate irregular shaped specimens with a pin mount base....

PELCO SEM vice bulk specimen holder, pin mount

The PELCO SEM large vice specimen holder is extremely versatile clamp intended for large and h...

SEM vice specimen mount, large double slotted, pin mount

The SEM double slotted large vice specimen pin mounts allow for set screw vice clamping of thi...

SEM vice specimen mount, mini double slotted, JEOL cylinder

These SEM double slotted mini vice specimen mounts allow for set screw vice clamping of thin s...

SEM top referencing metallographic specimen mounts, M4 cylinder

The SEM top referencing metallographic specimen mount allows for spring-loaded mounting of spe...

SEM vice specimen mount, small slotted, M4 cylinder

Small set screw vice with an open slot of 4mm wide and 5mm deep. Diameter of mount is 15mm x 1...

SEM vice specimen mount, large slotted, M4 cylinder

These SEM slotted large vice specimen mounts allow for set screw vice clamping of thin section...

SEM vice specimen mount, large double slotted, JEOL cylinder

These SEM double slotted mini vice specimen mounts allow for set screw vice clamping of thin s...

SEM vice specimen mount, double slotted, M4 clyinder

Double slotted set screw vice with 2 x 1mm wide x 3mm deep slots to...

SEM vice specimen mount, small slotted, pin mount

The SEM vice specimen mount is single slotted 4mm wide x 5mm deep with stainless steel screw a...

SEM vice specimen mount, mini double slotted, pin mount

The SEM vice specimen mount is a mini double slotted mount with 3.2mm diameter  pin stub base....

SEM metallographic specimen mounts, pin mount

The SEM metallographic specimen mounts allow for mounting of specimens from 22mm up to 50mm di...

SEM bulk specimen holder, pin mount

The SEM multi-purpose specimen mount can accommodate irregular shaped specimens up to 25mm wit...